เครื่องควบคุมอุณหภูมิแบบดิจิตอล
Digital Temperature Controller รุ่น HY Series
คุณลักษณะ
เครื่องวัดและควบคุมอุณหภูมิ เป็นเครื่องควบคุมอุณหภูมิที่ใช้ในการควบคุมอุณหภูมิ ใช้ในอุตสหกรรทุกประเภท เช่น การประยุกต์การใช้งานเครื่องฉีดพลาสติก, โรงงานเคมีหรือโรงงานผลิตสายใยไฟเบอร์, อุตสาหกรรมทางเคมีภัณฑ์, อุตสาหกรรมการผลิตอาหาร, อุตสาหกรรมเซรามิกส์, อิฐ ฯลฯ, ห้องทดสอบและควบคุมอุณหภูมิ และเครื่องบรรจุภัณฑ์ เป็นต้น
- Clear Digital indication
- Alarm set up (HY-8200s)
- Simple temperature set up
- Proporting control or ON/OFF control
คุณสมบัติ
| Suffix code | ||||||||
|---|---|---|---|---|---|---|---|---|
| Model | Code | Desciption | ||||||
| HY | - | | | | | | | Digital temperature controller |
| Dimension (W x H) |
8000S | - | - | - | - | - | - | 96 x 96 mm |
| 8200S | - | - | - | - | - | - | 96 x 96 mm (alarm setting general specification) | |
| 72D | - | - | - | - | - | - | 72 x 72 mm | |
| 48D | - | - | - | - | - | 48 x 48 mm | ||
| Control type | F | - | - | - | - | - | ON/OFF control | |
| P | - | - | - | - | - | Proportional control | ||
| Input | K | - | - | - | - | K thermocouple | ||
| J | - | - | - | - | J thermocouple | |||
| R | - | - | - | - | R thermocouple | |||
| D | - | - | - | - | RTD (KPt 100Ω) | |||
| P | - | - | - | - | RTD Pt 100Ω (iEC) | |||
| V | - | - | - | - | 1 - 5 VDC | |||
| C | - | - | - | - | 4 - 20 mA DC | |||
| Control output | M | - | - | - | Relay | |||
| C | - | - | - | Current output (4 - 20 mA DC) | ||||
| S | - | - | - | SSR (voltage pulse output, 12 VDC) | ||||
| Alarm output | N | - | - | None | ||||
| O | - | - | High alarm (HY-8200S) | |||||
| Control action (internal selection) | R | - | Reverse action (heating control) | |||||
| D | - | Direct action (cooling control) | ||||||
| Range code | - | Refer to the range and input code | ||||||
| Specification | |||||
|---|---|---|---|---|---|
| Model | 8000S | 8200S | 72D | 48D | |
| W x H x D (mm) | 96 x 96 x 125 | 96 x 96 x 125 | 72 x 72 x 110 | 48 x 48 x 100 | |
| Power Voltage | 110/220 VAC, 50/60Hz | ||||
| Power Consumption | 3 VA | ||||
| Input | Input (Sensor type) selection by the configuration suffix code. a) Thermo couple: K, J, R, b) RTD: kPt 100Ω(KS), Pt 100Ω(IEC 751) c) DC current: 4 to 20 mA d) DC coltage: 1 to 5 DCnt |
||||
| Control Output | Relay contact: 250 VAC 3A (Resistance load), SSR: 12 VDC (Constant voltage pulse) (Load resistanve min. 800Ω), Current 4 - 20 mA DC (Load resistance max. 600Ω) |
||||
| Control Method | Proportional or ON/OFF control | ||||
| Alarm Output | - | Relay contact: 250VAC 3A | - | - | |
| Setting Method | By B.C.D S/W | ||||
| Permissible input resistance | Thermocouple: Max. 250Ω, RTD: Max. 10Ω | ||||
| Indication range | Setting temperature range | ||||
| Display | LED Display | ||||
| Setting and display accuracy | Set Value: ±1.0% of FS. Display: ±0.5% of FS | ||||
| Control sensitivity | Approx. 0.2% FS. (Fixed) | ||||
| Proportional Cycle | Relay contact 25 - 30 s SSR: 2 - 4 sec | ||||
| Reset Range | Max ±1.5% of Range | ||||
| Dielevtric Strength | 2,000 VAC 50/60Hz for 1 minute (Primary terminal-secondary terminal) | ||||
| Vibration | Resistance | 2 - 55 Hz, X, Y, Z each position for 10 minutes | |||
| Durability | 10 - 55 Hz, X, Y, Z each position for 2 hrs | ||||
| Shock | Resistance | 100 m/s2 6 position, each 3 times | |||
| Durability | 300 m/s2 6 position, each 3 times | ||||
| Life | Mechanical | Min. 10 million times (Relay type) | |||
| Electrical | Min. 0.3 million times (Relay type) | ||||
| Ambient temperature and humidity | 0 - 50 °C (32 - 122°F), 35 - 85 %RH (without freeze) | ||||
