เครื่องวัดค่าพลังงานไฟฟ้า

Energy Meter

เครื่องวัดค่าพลังงานไฟฟ้า Energy Meter เป็นเครื่องบันทึกค่าพลังงานไฟฟ้า และฮาร์มอนคส์ แบบดิจิตอล สามารถวัดค่าได้หลากหลาย สามารถวัดค่าทุกพารามิเตอร์ได้พร้อมๆกัน บ้างรุ่นเป็น เครื่องบันทึกพลังงานไฟฟ้าและฮาร์มอนิคส์แบบมือถือ CA-8335 Qualistar+ เครื่องวิเคราะห์พลังงานและคุณภาพไฟฟ้ารุ่นใหม่จาก Chauvin Arnoux (โชวินอาร์นุกซ์) ผู้นำด้านเครื่องมือวัดจากยุโรป ซึ่งเป็นที่ยอมรับอย่างแพร่หลายในเรื่องความสามารถและความคุ้มค่า เครื่องมือวัดและวิเคราะห์ด้านพลังงานไฟฟ้าและคุณภาพไฟฟ้าสมบูรณ์แบบ มีคุณสมบัติเด่นคือ สามารถทำงานได้หลายฟังก์ชั่นในเวลาเดียวกัน (Parallel Operation) ทั้งการวัดวิเคราะห์ค่าและการบันทึกข้อมูล ทำให้ผู้ใช้งานสามารถสังเกตและวิเคราะห์ภาพรวมของระบบไฟฟ้า ณ สถานที่ปฏิบัติงานได้อย่างรวดเร็ว ตัวเครื่องยังถูกออกแบบมาให้ใช้งานง่าย

มีหลากหลายยี่ห้อ และสินค้าให้เลือก ;คลิกเลือกตามยี่ห้อ (Brand)

เครื่องวัดค่าพลังงานไฟฟ้า Energy Meter รุ่น HiTESTER 3286-20
ยี่ห้อ HIOKI

เครื่องวัดค่าพลังงานไฟฟ้า
Energy Meter
รุ่น HiTESTER 3286-20

คุณลักษณะ

เครื่องบันทึกพลังงานไฟฟ้าและฮาร์มอนิคส์แบบมือถือ ใช้สำหรับไฟฟ้า Single-Phase และ Three-Phase

วัดค่าได้หลากหลาย Voltage, Current, Voltage/Current Peak, Active/Reactive/Apparent power, Power Factor, Phase Angle, Reactivity, Frequency, Voltage/Current Harmonic Levels , Waveform Peak, Phase Detection, Max./Min. Value Record, Data Hold, Auto Power Off, RS-232C Output (Options are Discontinued, So Cannot Use RS-232C)

  • Display LCD, Max. 6000 Digits, Display Refresh Rate : 1 Time/s (Normal) 1 Time/3s (Slow), 1 Time/2s (Harmonic Level)
  • Power Supply Stacked Alkaline Battery (6LR61, 6LF22) ×1, Continuous use: 25 Hours
  • Core Jaw Dia. φ 55 mm (2.17 in) or 80 mm (3.15 in) × 20 mm (0.79 in) Bus-Bar
  • Dimensions and Mass 100 mm (3.94 in) W × 287 mm (11.3 in) H × 39 mm (1.54 in) D, 650 g (22.9 oz)

คุณสมบัติ

Basic specifications
Measurement items Voltage, current, voltage/current peak, effective/reactive/apparent power(Single-phase or 3-phase), power factor, reactivity, phase angle, frequency, phase detection(3-phase), Voltage/current harmonic levels (up yo 20th)
conductor diameter

Ø55mm(2.16"), 80x20 mm busbar max

Display LCD, digital(6000 counts)
Retification method RMS (true root mean square value)
Display update rate NORMAL approx 1 time/sec, SLOW 1 time/3-sec at HARM meas. approx 1 time/2-sec
Analog response time 4.0 seconds or less (when input is chaged from 0% to 90% of range.)
Effective value P.F 0.000 (lead) to 1.000 to 0.000(lag); 1Ø only
Max allowable current 1000 Arms cont.
Max sable circuit voltage 600Vrms (imsulated conductor)
Effective input range Votage 10V to 600V, Currrent 1A to 100A, Power 80V to 600V and 1A to 1000A
Min Display value Voltage 0.6Vrms, Current 0.06Arms
Display indication range
(RMS)
5 or less are zero-suppressed, and the upper limit is to 125% of the range setting (to 100% for the 1000A range)
Circuit dynamic 2.5 or less (1000A and 600V range is 1.7 or less)

Voltage/Current/Power Measurement

Range tableAC Current
20.00A200.0A1000A
AC Voltage 150.0V Single-phase 3.000kW 30.00kW 150.0kW
*3-phase
(balanced load)
6.000kW 60.00kW 300.0kW
300.0V Single-phase 6.000kW 60.00kW 300.0kW
*3-phase
(balanced load)
6.000/12.00kW 6.000/12.00kW 600.0kW
600V Single-phase 12.00kW 120.0kW 600.0kW
*3-phase
(balanced load)
24.00kW 240.0kW 600.0/1200kW

*3-phase power is calculated and displayed on the basis of a balanced, 50/60Hz, sine wave input.
For apparent power and reactive power, the unit of watts in the above table is replaced by VA and var repectively.

Power factor/Phase angle/Reactivity measurement
Detection method Phase discrimination by phase detection (zero crossing)
Power factor (cosϕ) 0.000 (lead) to 1.000 to 0.000 (lag)
Phase angle 90.0° (lead) to 0.0° to 90.0°(lag)
Reactivity (sinϕ) 0.000(lead) to 1.000 to 0.000 (lag)
[Frequency measurement] Effective in the voltage and current function
Measurement rage 30.0Hz to 100Hz (at 100.0Hz range)
100Hz to 1000Hz (at 1000Hz range)
Min. input level Voltage 10 Vrms-sine wave, Current 1 Arms-sine wave
[Wave peak measurement] Effective in the voltage and current functions
Measurement range 150(375 peak) / 300(750 peak) / 600(1020 peak) V
20(50 peak) / 200(500 peak) / 1000(1700 peak) A
Effective Input Range Effective value of sine wave is within effective input permissible in the range and within circuit dynamic
[Harmonic measurement] Effective in the voltage and current functions
Measurement items Level of each order, percentage of each order and total harmonic distortion (THD-F and THD-R)
Measurement range Fundamental frequency 50/60Hz
Window width 1 cycle(50/60Hz), Data point 256 point
Window type Rectangular
Order analyzed Up to 20th
[Other function]
Phase detection Normal / reverse / missing (at 3-phase balanced load)
Record MAX. value and MIN. value (Effective in the voltage, current and effective / apparent power functions)
Battery capacity Displayed in % when the unit is powered on
Data hold Holds display
Auto power off Approx 10 minutes, buzzer sounds just before power is turned off, can be extended or cancelled
Data output RS-232C interface by optical insulating coupler
Frequency ±0.3%rdg ±1dgt(at 100.0Hz range)
±1.0%rdg ±1dgt(at 1000Hz range)
Wave peak ±3.0%rdg ±5dgt(45Hz to 1kHz)
Thermal coefficient Voltage and current within±0.1XAccuracy/°C (0 to 40°C) Phase within±2° (0 to 40°C)
Condutor position Within ±0.7% in any direction from the center of sensor
External magnetic field 400A/m corresponds to 1.00 A max
Power factor influence ±10.0%f.s (cosϕ = 0.5)
Harmonics Oder Accuracy Oder Accuracy
1 ±3.0%rdg±10dgt 9, 10 ±5.0%rdg ±10dgt
2 to 6 ±3.5%rdh±10dgt 11 to 15 ±7.0%rdg ±10dgt
7, 8 ±4.5%rdg±10dgt 16 to 20 ±10.0%rdg ±10dgt
General Specification
Applicable standards Safety
EN61010-1:1992+A2:1995CAT III600V
EN61010-2-031:1996,EN61010-2-032:1995
EN60529:1991 IP40
EMC
EN61326-1:1994+A1:1998+A2:2001
Withstand voltage
(50/60Hz, 1 minute)
5.55kV AC between clamp and frame, between clamp and circuitry
Measurement method Digital sampling method
Operating temperature 0 to 40°C, 80%rh or less, no condensation
Strorage temperature -10 to 50°C, no condensation
Power supply
(9V battery)
6LR61 alkaline batteryX1 (continuous operation max 25 hours)
6F22 manganese batteryX1 (continuous operation max 10 hours)
Dimensions, mass Approx 100W x 287H x 39D mm. Approx 650g
(Approx 3.94"(W)11.3"(H)1.54"(D),Approx 22.6oz)

ศูนย์รวมเครื่องมือวัดและควบคุมแบบอัตโนมัติ ทางด้านอุตสาหกรรม ทุกชนิด

" จากประสบการณ์ที่ยาวนาน ในวงการขายการนำเข้าเครื่องมือวัด และควบคุมแบบอัตโนมัติ ทางด้านอุตสาหกรรม ด้วยทีมงานเชี่ยวชาญ พร้อมให้คำปรึกษาบริการก่อนและหลังการขาย คุณภาพดี มีมาตรฐาน "

บริษัท สุพรีมไลนส์ จำกัด จำหน่ายอุปกรณ์อุตสาหกรรมเครื่องมือวัด-เครื่องควบคุมแบบอัตโนมัติ อาทิเช่น เครื่องควบคุมอุณหภูมิและความชื้น, หัววัดอุณหภูมิ, เครื่องนับจำนวน, เครื่องตั้งเวลา, เครื่องทอสอบความเป็นฉนวน, เครื่องวัดแรงดันไฟฟ้าและกระแสไฟฟ้า, แคลมป์มิเตอร์, มัลติมิเตอร์, มิเตอร์, เทอร์โมมิเตอร์, ฮีตเตอร์, เทอร์โมคัปเปิล, เซนเซอร์ตรวจจับแบบต่างๆ เป็นต้น และยังมี เครื่องจักรบรรจุภัณฑ์, เครื่องซีลสูญญากาศขนาดเล็ก Fresh World

Contact us || บริษัท สุพรีมไลนส์ จำกัด

หมวดหมู่สินค้า / Tags Products

Contact us

โทร : 0-2722-2233
แฟกซ์ : 0-2722-2211
This email address is being protected from spambots. You need JavaScript enabled to view it.

Visit us

80, 82 ถนนพัฒนาการ
แขวง/เขต ประเวศ กรุงเทพฯ 10250
supremelines.co.th

Office hours

Mon. - Fri. | 08.00 17.30
facebook/supremelines
LINE@: @supremelines

ติดต่อเรา Supremelines โปรโมชั่นสินค้า Catalog Heater Online